| PRODUCTS |
Vehicle Tracking
Device capable of Stopping Vehicle by SMS from cell phone (IDCT02)
Overview of the device:
IDCT02 is an easy equipment to use system for maximizing' vehicle tracking and
fleet management through the GPS, GPRS and GSM technology. The automatic vehicle
tracking system works as a fleet manager when interfaced with a web map you can
locate your vehicles live and watch where they go. This system can remotely
locate all your vehicles, anywhere all over the country, and you can monitor
your field operatives and manage them from the confines of your office on your
computer.

Features
1. Tracking via SMS or GPRS (TCP/UDP)
3.
Tracking by time interval
5. SOS
panic button
6.
Geo-fencing control
7. Low
battery alert
8.
Speeding alert
9. External Power cut alert
10. Remote engine / fuel cut
11. Real time Tracking
12. History location play back
13. ACC detecting
14. Car door / trunk detecting
|
IDCT02
SPECIFICATIONS
|
|
|
ITEM |
SPECIFICATIONS |
|
Dimensions |
11.4 x 8.0 x 2.0 (cm) |
|
Weight |
140g |
|
GSM module |
GSM 900/1800/1900Mhz
|
|
GPS Chipset |
latest GPS SIRF-Star III chipset |
|
GPS Sensitivity |
-158Db |
|
GPS Frequency |
L1, 1575.42 MHz |
|
C/A Code |
1.023 MHz chip rate |
|
Channels |
20 channel all-in-view tracking |
|
Position Accuracy |
10 meters, 2D RMS |
|
Velocity Accuracy |
0.1 m/s |
|
Time Accuracy |
1 us synchronized to GPS time |
|
Default datum |
WGS-84 |
|
Reacquisition |
0.1 sec., average
|
|
Hot start |
1 sec., average |
|
Warm start |
38 sec., average |
|
Cold start |
42 sec., average |
|
Altitude Limit |
18,000 meters (60,000 feet) max. |
|
Velocity Limit |
515 meters/second (1000 knots) max. |
|
Backup Battery |
850mAh |
|
Power Supply |
+9V - +35V / 1.5A |
|
LED |
1 LED light to show working status. |
|
Button |
One SOS button |
IDCT04 is an easy equipment to use system for maximizing' vehicle tracking and
fleet management through the GPS, GPRS and GSM technology. The automatic vehicle
tracking system works as a fleet manager when interfaced with a web map you can
locate your vehicles live and watch where they go. This system can remotely
locate all your vehicles, anywhere all over the country, and you can monitor and
speak to your field operatives and manage them from the confines of your office
on your computer.
Features
Tracking via SMS or GPRS (TCP/UDP)
Current location report
Tracking by time interval
SOS panic button
Geo-fencing control
Low
battery alert
Speeding alert
Cut off the car power/fuel supply, to stop the car by SMS or by Tracking Center
Alert when CT04 enters/exits GPS blind area
Expandable Features (Optional Items)
Shaking Alert
Automatic voice broadcast according to GPS position or pre-set time. Voice contents can be recorded.
Door / window open alarm
Get detail actual address via SMS directly
Fuel Monitoring via centre system
Locate by SMS with Google Map's link
Car door on /off status report via SMS.
|
IDCT04
Specifications |
|
|
Dimension |
|
|
Installation Dimension |
|
|
Weight |
|
|
Frequency |
GSM 900/1800/1900Mhz or GSM 850/900/1800/1900Mhz |
|
GPS Module |
SiRF-Star III |
|
GSM Module |
Simcom |
|
GPS Sensitivity |
-158Db |
|
GPS Frequency |
L1, 1575.42 MHz |
|
C/A Code |
1.023 MHz chip rate |
|
Channels |
20 channel all-in-view tracking |
|
Position Accuracy |
10 meters, 2D RMS |
|
Velocity Accuracy |
|
|
Time Accuracy |
1 us synchronized to GPS time |
|
Default datum |
WGS-84 |
|
Reacquisition |
0.1 sec., average |
|
Hot start |
1 sec., average |
|
Warm start |
38 sec., average |
|
Cold start |
42 sec., average |
|
Altitude Limit |
18,000 meters (60,000 feet) max. |
|
Velocity Limit |
515 meters/second (1000 knots) max. |
|
Backup |
850mAh |
|
Power Supply |
+9V - +35V / |
|
LED |
2 LED lights to show GPS/GSM working status. |
|
Flash Memory |
8MB |
|
Packing |
In box of |
Overview of the device:
This device has been made by using industrial grade GSM/GPRS modules, 50
channels uBlox GPS module, and 120MHz high speed processor, features GPS real
time positioning, vehicle signal monitoring, vehicle control, alarm report,
two-way voice speaking, and remote listening. It uses UDP communication protocol
that the data size is small having the advantage to save the operating airtime
cost. A ComConfig Tool program is used to initialize the IDSP10 such as the IP,
port, APN, vehicle ID, heart beat period, hand shake period, etc. A RS232 com
cable is used to connecting IDSP10 and a PC to configure the device. IDSP10 also
supports SMS command setting. The device supports temperature monitoring, which
is suitable for cold truck monitoring, and door monitoring, which is suitable
for truck containing important assets. There are three indicating light at
the front panel showing its status. IDSP10 is suitable for use in GPRS
environment offering SMS and GPRS data transmission
IDSP10 Features
Two-way GPRS connection
Support UDP protocol
Remote parameter setting and function testing
GPRS
reporting time interval from 5 sec to 18 hours
GPRS blind zone 3 hours recording capacity
Support optional LCD panel
Panic button
Support optional three temperature sensors
Support optional telephone handset
Support optional door sensor
Support two-way voice speaking
Support remote listening
ComConfig program for initialization
Support OTA upgrade
|
ADSP10 Specifications |
|
|
Main power input |
DC12~36V |
|
Working current |
24V DC: 60-120 mA 12VDC: 110-210mA |
|
Standby current |
24VDC: <55 mA 12VDC: <105mA |
|
Backup Power |
Around 3hr at reporting 30sec |
|
Signal in/out |
10 in/3 out |
|
Com port |
RS232, +5VDC output |
|
Communication |
SMS, GPRS |
|
Operating Temperature |
-25
°C to +75
°C |
|
Storage Temperature |
-40
°C to +85
°C |
|
Relative Humidity |
93±2%,
non-condensing |
|
Vibration |
10-55-10Hz, amplitude: 2mm |
|
GSM Frequency bands |
850/900/1800/1900MHz |
|
GPS Acquisition Time
|
Hot Start <1 seconds
Warm Start <29 seconds
Cold Start <29 seconds
GPS General 50 channels, L1, C/A code |
|
Temp sensor |
Range:-55~+125
°C |
|
IDSP10
GPS Performance Specifications |
|
| General |
50 channels autonomous GPS receiver |
|
Acquisition Time |
Hot Start <1 second
Warm Start <29 second
Cold Start <29 second |
| Position Accuracy |
2.5m CEP (DGPS mode 2.0 CEP) |
| Max. Velocity |
515 m/s |
| Velocity accuracy |
0.1m/s |
| Heading accuracy |
0.5 degree |
| Dynamics |
≤4g |
|
Antenna: |
GPS antenna, GPRS antenna,-26dB |
| Tracking Sensitivity - |
160dBm |
|
IDSP10
GSM Performance Specifications |
|
| Frequency bands |
850/900/1800/1900MHz Compliant to Phase II |
| Transmission mode |
577μs
every 4.615ms for GSM/GPRS cl 2 |
| Power consumption |
PCL5: 2W emission at EGSM900 |
| Sensitivity |
EGSM/900: <-110dBm |
| GPRS connectivity |
GPRS multi-slot class 10 |
| SIM interface |
Support SIM card 3V |
| SPI bus |
max speed transfer 3.25Mb/s |
| Two wires interface |
max speed transfer 400Kb/s |
| Dynamic range |
63dB |
| Phase error |
< 5°
RMS at peak power |
|
Frequency error |
±0.1
ppm max |
|
IDSP10
Hardware Dimensions |
|
Dimensions 104 mm (L) x 66 mm (W) x 27 mm (H) |

Overview of the
Device
Features:
Waterproof switch and plug
Two strong magnets at bottom (can add one more)
Support TCP or UDP protocol
Remote parameter setting and testing
Support GPRS or SMS communication
GPRS reporting interval from 30 sec to 1 hour
3 hours storage capacity for GPRS blind zone
Expansible historical track
Power indication
Remote listening, for 3 preset telephone number
Force sensor to detect movement
Idling for 10 min will go to power saving mode
Industrial grade waterproof and anti-noise design
![]() ![]() |
| IDSP45 Specifications | |
| Size | 116mm (L) 71mm (W) 29.5mm (H) |
| Weight | 380g (including magnet and battery) |
| Standby current | 0.5-1mA (idling) |
| Working current |
6-20 mA (moving) |
| Positioning current |
65 mA (instant max. 300mA) |
| Standby time | 240 days |
| Working time | 31 days |
| Battery | Lithium 3.7v/12500mA |
| Communication | SMS, GPRS |
| Operating Temperature |
-40 °C to +85
°C |
| Storage Temperature |
-55 °C to +100
°C |
| Relative Humidity | 5% to 95%, non-condensing |
|
GSM Frequency bands |
EGSM 900, GSM 1800, GSM 1900
GSM 850, GSM 1800, GSM 1900 |
| GSM Transmit power |
Class 4 (2W) at EGSM 900 and GSM 850
Class 1 (1W) at GSM 1800 and GSM 1900 |
| GPS Acquisition Time |
Hot Start 1 seconds typical TTFF
Warm Start 38 seconds typical TTFF
Cold Start 42 seconds typical TTFF |
| GPS General 20 channel | L1(1575.42 MHz) |
| GPS Performance Specifications | |
| General |
20 channel
L1 (1575.42 MHz) C/A code,
autonomous GPS receiver |
| Acquisition Time |
Hot Start 1 seconds typical TTFF
Warm Start 38 seconds typical TTFF
Cold Start 42 seconds typical TTFF |
| Reacquisition Time | 0.1 seconds average |
| Position Accuracy | 10 meters, 2D |
| Altitude | < +/ 35 m vertical in term of 95% |
| Velocity | 0.1 m/s |
| Time | 1 us synchronized to GPS time |
| DGPS | < 5m (50%) |
| Acquisition Sensitivity |
Hot 23 dB-Hz
Warm 15 dB-Hz,
Cold 30 dB-Hz, |
| Tracking Sensitivity | 13 dB-Hz |
|
GSM Performance Specifications |
|
| Frequency bands |
EGSM 900, GSM 1800, GSM 1900
GSM 850, GSM 1800, GSM 1900
Compliant to GSM Phase 2/2+ |
| GSM class | Small MS |
| Transmit power |
Class 4 (2W) at EGSM 900 and GSM 850
Class 1 (1W) at GSM 1800 and GSM 1900 |
| GPRS connectivity |
GPRS multi-slot class 10
GPRS mobile station class B |
| GPRS data downlink transfer | max. 85.6 kbps |
| GPRS data uplink transfer | max. 42.8 kbps |
| SMS | MT, MO, CB, Text and PDU mode
SMS storage: SIM card plus 25 SMS |
| FAX | Group 3: Class 1, Class 2 |
| SIM interface | Supported SIM card 3V |
|
Hardware
Description & Physical Dimensions |



Water Proof
Vehicle Tracking Device with listening provision (IDSP46
Overview of the
Device
IDSP46 vehicle tracking terminal is a fleet and tracking solution, with
quad-band GPRS communication and high gain GPS antenna. The device can be
installed inside the vehicle with high quality GPS signal reception. Overall
design is simple and tough, suitable for use in vehicle fleet and monitoring,
transportation management, and rental car management. Using high efficient power
management, IDSP46 is one of the devices having the lowest power consumption.
Industrial grade anti-noise and IPX5 waterproof design makes the device stable
and durable. Equipped with internal vibration sensor, the device will enter to
power saving mode in three minutes after ACC off. The device comes with internal
memory for recording data when the GPRS connectivity is poor.The connecting
cable is very simple that it comes with only two power wires which make the
installation very easy and simple
Features
Two-way GPRS connection, can set two APN
Support UDP or TCP protocol
Remote parameter setting and function testing
GPRS reporting time interval from 30 second to 1 hour
GPRS blind zone three hours recording capacity
Alarm trigger input, expansible
Preset three telephone number for remote listening
Power saving mode in 3 minutes after ACC off
Industrial grade anti-noise design
2KV vehicle ignition on interference testing past
IPX5 waterproof
9-28V power input, 8mA power consumption
SMS and GPRS mode
|
General Specifications |
|
| Dimension |
73 (L) x 48 (W) x 25 (H) mm |
| Power input |
DC 12V or 24V |
| Standby current |
5-16mA (GPS off) |
| Working current |
50-75mA (GPS on) |
| Weight |
70g |
| Vehicle ignition on interference testing |
2KV |
| Input interface |
Alarm triggered input (expansible) |
| Working temperature: |
-20°C to +65°C |
| Storage temperature |
-55°C to +100°C |
| Waterproof: |
IPX5 |
| Memory for GPS data |
512K |
| GPRS Specifications | |
| General |
Class 4 (2W) at EGSM 900
Class 1 (1W) at GSM1800 and GSM1900 GPRS mobile station class B, Compliant to GSM phase 2/2+ |
| Protocol supported | TCP, UDP |
| Download/upload | 85.6Kbps |
| GPS specifications | |
| General | Tracks up to 32 satellites |
| Receiver |
L1, 1575.42 MHz |
| C/A code | 1.023MHz |
| Update rate | 1HZ |
| Minimum signal tracked |
158dBm |
| Reacquisition | <0.1 sec average |
| Acquisition Sensitivity | Hot start 1sec, warm start 33sec, cold start 36sec |
Hardware
Description & Physical Dimensions


Vehicle Device with RFID interface (IDRF01):
Overview of the Device:
This is a GPS, GPRS, GSM based device for fleet management where the location of
each and every vehicle can be viewed at any point of time. Location information
along with various other parameters is displayed to the fleet owners and also
stored for later review. The MIS reports generated by the application provide
vital information about fleet performance to the fleet owner. The system is
configured for various alerts; these alerts notify significant events relevant
for making immediate and correct decisions to run the operations smoothly. This
device provides a centralized approach to the vehicle and its occupants or
material being transported by use of RFID Tags.
Salient Features
Authenticated access to the gadget
Configuration interval of minutes to several days setting on the air.
Locate vehicle using GPRS/GSM mobile phones and on a map on a PC or GPRS enabled cell phone or PDA.
Provision for alert when vehicle moves from stationary position
Receive alert when vehicle crosses the speed limit pre-defined by the user
Provision to specify preferred and /or restricted zones (as rectangular constraints/ regions of different sizes)
Alerts on any intrusion into the gadget
Provision to store data inside the gadget when vehicle is in GPRS shadow
Auto setting during the power cycle (Power on-off)
Alerts on any antenna removal or failure is detected
Two way voice communication.
Identify any pilferage of fuel or any instance of leakage.
RFID interface to identify the parsons / material on entry/ exit from the
vehicle.
Immobilizer: Stopping the vehicle
from cell phone / PC .
Software Feature
a) Reports
Trip reports for each vehicle can be generated.
Additional parameters like driver information; cargo information etc. can be added.
Reports for over speed, excessive stoppage time can be generated.
Mileage reports for fuel consumption
In /out instance of person / material based on RFID Tags
b) Alerts (User defined Alerts)
Over speed Alert
Geofence: 5 preferred and 5 restricted areas per vehicle.
Destination Alert
Move Alert
c) Vehicle route history
Vehicle path for specific time interval plotted on map
Parameters like speed, idle time are displayed over the tool tip.
In / Out historical data regarding persons / material based on RFID tags.
d) Vehicle display and live tracking
Four screen live tracking for different vehicles
Location based vehicle search
Colored icons indicating vehicle speed status(Stopped/moving/over speeding) action.
TECHNICAL SPECIFICATIONS
Accuracy: 7.0 meters CEP 95% of the time n GPS Receiver:
L1 frequency 1575.42 MHz. 16 Channel GPS Receiver n Communications: GSM/GPRS
900/1800 MHz, Transmit Power (2W) at E-GSM, (1W) at DCS n Input ports: (1)
Analog Input, (2) Multipurpose Digital Inputs n Output Ports: 2 Multipurpose
Digital Outputs
Power
a) Source
v 800 mAH or 1200-mAH-battery backup
v 100 mA average current
b) Consumption v 1 . 4 W a v e r a g e w h e n f ully p o w e r e d , 6-36V DC operating n Antenna: Magnetic mountable GPS antenna to
Temperature: -10° to +65° C Operating
Humidity: 95% non-condensing
Packaging: Splash proof, dust proof aluminum
Housing Size: Less than 118 mm X 76 mm X 43 mm n Weight: Less than 250 grams (without backup battery)